<

www.668866.com

SZ CnAuto automation equipment Co., Ltd.

Specializing in the production of automatic\precision\high speed dispenser manufacturers

Hot Tel:

18929475867

Contact

TEL:

18929475867

www.668866.com自动化设备有限公司

Email:jerry@prcrobot.net

QQ:a href="http://wpa.qq.com/msgrd?v=3&uin=88965272&site=qq&menu=yes":

ADD:东莞市塘厦镇石潭浦大迳路62号

How to Solve the Wire Drawing Problem of Automatic Coating M

作者:马交易?日期:2019-09-20 09:44?浏览:

Wire drawing of automatic glue coating machine is the most common phenomenon for novices, especially the use of high-viscosity glue. Because of the technological requirements, some products must use glue with high viscosity. Because of the high glue viscosity, the phenomenon of wire drawing often occurs in the use of glue coating machine, which has a great impact on the quality of glue and the aesthetics of products. 。 How to effectively solve the wire drawing problem of automatic glue coating machine has become a concern of users.
 
How to effectively solve the problem of glue-coated wire drawing? First, you need to find out the problem of dispensing and drawing in your existing automatic glue coating machine. If you don't know how to find out the problem, then follow the in-depth analysis of the small edition of the article, you can find a solution to the problem of dispensing and drawing in glue coating machine. Products for quality and aesthetic requirements are higher, first of all, from the point of view of the use of dispensing valves.
全自动涂胶机  
Solutions to Wire Drawing
 
Generally used dispensing valves can be adapted to various types of glue, but not all glue is not faulty. In order to make the dispensing process more delicate, it is suggested to consider replacing dispensing valve, using spray valve instead of Z-axis movement and spraying glue without touching the surface of the product, which can solve the problem of wire drawing of the dispensing machine.
 
涂胶机  
 
How to effectively solve the wire drawing problem of glue coating machine? The non-contact jet valve manufactured by the intermediate system has the advantages of pneumatic working principle and high stability. It is suitable for precise dispensing, and its speed is faster than that of the ordinary dispensing valve. The fuel injection valve has a high precision control system, the minimum dosage can reach 2nL, the maximum frequency can reach 280 Hz, and the maximum viscosity is 100000 mPa.
 
 
331涂胶机 自动涂胶机  
Solving the wire drawing problem is only one of the advantages of jet valves. High precision, fast speed and contactless dispensing are the real advantages of jet valves. These are functions that traditional dispensing valves cannot achieve. This is a very good solution to the problem of drawing glue machine.