SZ CnAuto automation equipment Co., Ltd.

Specializing in the production of automatic\precision\high speed dispenser manufacturers

Hot Tel:







QQ:a href="http://wpa.qq.com/msgrd?v=3&uin=88965272&site=qq&menu=yes":


The direct influence of glue viscosity selection on automati

作者:马交易?日期:2019-08-16 22:38?浏览:

The automatic dispensing machine has the functions of high viscosity, small glue point, and wire drawing phenomenon controlled. If the viscosity of the automatic dispenser is small, the glue may infiltrate into the product. Therefore, the adaptive viscosity of glue viscosity selection is very important!
Pressure setting of dispensing
全www.668866.com Pressure setting of dispensing machine is very important. Pressure of automatic dispensing machine will cause glue overflow. Excessive pressure will cause leakage point. Leakage point may be that intermittent dispensing conditions may not meet the dispensing process required by the product, resulting in low qualified rate and low operating efficiency.
Glue viscosity selection plays an important role in packaging accuracy, packaging adhesion and overall packaging quality, so colloid viscosity is the dispensing requirement in packaging process.
全www.668866.com In the process of packaging with automatic dispensing machine, every useful step of operating colloid viscosity is found. Colloid has always been the manufacturer of fluid treatment equipment and all the production lines in urgent need. Then the manufacturer of automatic dispensing machine introduces the solution of colloid abnormal viscosity.
One of the common steps in the solution of abnormal glue viscosity of automatic dispensing machine is the assembly of heater, which is one of the common and fast methods in all methods.
In some packaging conditions, it is necessary to increase the condition and colloid temperature to match the packaging process. Because the temperature of the increased colloid is within a certain range, the temperature change caused by the pulse is reduced, and the effect of fluid consistency is ensured.
Other requirements are packaged by reducing colloid viscosity. The operation and adjustment of colloidal viscosity are also reduced on a large scale. Automatic dispensing machine often appears in the packaging process. The frequency of wire drawing and tailing, the fluid is automatic. The dispensing line, dropping speed, viscosity of dispensing machine and glue filling machine have a long-term impact on the quality of all packaging products, and the operation technology and technology of plastic body need to be further strengthened.