Dispensing system is very important and belongs to the core of the machine. Why is the chip important? The main reason is that without the chip, there is no brain, and intelligent dispensing can not be carried out. The dispensing system is very important .
W-type gluing technology is on the same plane, which can be produced by our companys gluing machine. The program can be set in the dispensing system according to the requirements, and the W-type gluing technology can be quickly solved. Various types can b.
There are several types of automatic machines and equipment suitable for gluing the sealing strip, but some conditions still need to be met, because the sealing strip must at least meet the glue storage and gluing setting. In view of these problems, our c.
The cabinet gluing is mainly applied on the peripheral card slot. In order to meet the requirements of gluing, our company has manufactured a suitable full-automatic gluing machine. The specifications, dispensing requirements and precision meet the requir.
Floor type automatic dispenser can be used for solar cell gluing, which is for large products. Due to the small platform of desktop automatic dispenser, it is unable to place large solar cells. The specifications of the machine need to be changed to achie.
There are many types of glue, including silica gel, hot melt adhesive, instant drying adhesive, anaerobic adhesive, crystal glue, etc. These are still the distinguishing features. There are 20 or 30 kinds of silica gel, and each type may have some differe.
As an automatic gluing machine manufacturer, at present, many gluing and dispensing industries will use our machines, such as solar junction box gluing and solar panel gluing, and other industries can produce suitable gluing machines for their production..
The solar panel needs to be glued and fixed on the back plate. The plane installation mode is to increase the heating area as much as possible. Due to the problems of product materials and application environment, the requirements for glue are very high. .
Our company has developed a full-automatic glue filling machine, which is specially used for capacitor glue filling. If single component glue or two-component glue are used, the pouring effect can be controlled and the better effect will be obtained. In a.
The magnetic core bonding is potted with epoxy resin adhesive. Covering the whole core can protect the magnetic core from external factors. It is moisture-proof, waterproof, discharge, insulation and so on. It is protected by glue. Many products will use .